ullyses.tech
← Back

16 November 2026 · Slicer

Slicer settings that improve every print

Layer height, walls, infill and retraction: get the basics right.

⚠️ This is placeholder content. Replace this article with your own text.

Placeholder article – replace this text with your own tip.

  • Layer height: 0.2 mm as a default (0.4 mm nozzle). Use 0.12 mm for detail and 0.28 mm for fast prototypes.
  • Walls: 3 perimeters add more strength than extra infill.
  • Infill: 15–20% gyroid is enough for most parts.
  • Retraction: calibrate with a retraction tower, especially for PETG.
  • First layer: printing slower (20–30 mm/s) improves adhesion.
#slicer